Chapter 4 How to Use the Operator Panel
1
D[Ready] is displayed on the LCD.
2
D[Main Menu] is displayed on the LCD.
Menu Function
|
| /Enter |
Send to | Check | Clear |
/Pause |
| /Back |
| Stop |
|
| Scan |
|
Counter
iMFF Reset Eject
cPower Button
d[Menu] Button
e[U] / [V] Button [Function/Enter] Button
f[Scan] Button
g[Function/Enter] Button
3 Press the [U] or [V] button and select [25: Doc Counting Mode], then press the [Function/Enter] button to confirm.
D[Doc Counting Mode (More documents)] is displayed on the LCD.
4 Load the documents on the hopper and press the [Scan] button.
100 sheets will be loaded as an example here.
DScanning starts and [Count] will display "100".
Documents may not be counted correctly if a multifeed occurs during scanning.
You can switch whether to enable multifeed detection by pressing the [Eject] button. For more details, refer to
" About the Indicators" (page 64).
5 Press the [Function/Enter] button to confirm.
D[Doc Count Check Mode] is displayed on the LCD.
hScan
See Step 6
70