Chapter 4 How to Use the Operator Panel
Item | Description | Setting/Value | Factory Default |
|
|
|
|
|
|
| |
|
|
|
|
5: Manual Feed | Specify the waiting time to clear Manual Feed mode. | SCSI or USB Connector 1: | 10 |
Timeout | It can also be configured from the Software Operation Panel. | 5, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, |
|
|
| 110, 120, 180, 240, 300, 360, 420, 480, |
|
|
| 540, 600, 900, 1200, 1500, 1800, 1999 |
|
|
| (seconds) |
|
|
| SCSI or USB Connector 2: |
|
|
| 5, 10, 20, 30 (seconds) |
|
|
|
|
|
6: Paper | Select whether to enable or disable Paper Protection. | 1: Enable | 2: Disable |
Protection | Enabling this setting reduces the risk of having the documents | 2: Disable | Sensitivity: |
| damaged upon feeding errors, by stopping the scan when the |
| |
| scanner detects a document that is unusually warped. | Sensitivity: | 2: Normal |
| You can specify the level of sensitivity to detect an abnormal | 1: Low |
|
| feeding of documents when Paper Protection is enabled. | 2: Normal |
|
| Documents are deformed (e.g. warped, bent, creased) when they | 3: High |
|
| are not being fed by the rollers properly. To detect such a |
|
|
| symptom and stop the scan, select [1: Low] to only detect |
|
|
| documents that are highly deformed, and [3: High] to also detect |
|
|
| documents that are slightly deformed. |
|
|
| Paper Protection is disabled in Manual Feed mode. |
|
|
| Enable/Disable can also be configured from the scanner driver’s |
|
|
| setup dialog box or the Software Operation Panel. In this case, |
|
|
| priority is given to the scanner driver setting unless you have |
|
|
| prioritized the operator panel setting. |
|
|
| Sensitivity can also be configured from the Software Operation |
|
|
| Panel. Priority is given to the scanner driver setting unless you |
|
|
| have prioritized the operator panel setting. |
|
|
|
|
|
|
75