Chapter 1 Scanner Overview

Connected via SCSI or USB Connector 2:

3 Start up the application to use for scanning.

1 Turn on the scanner.

For information on how to turn on the power, refer to "1.3 Turning the Power ON/OFF" (page 17).

zWhen connected via SCSI, turn on the scanner and confirm that [Ready] is displayed on the LCD before you turn on the computer.

zWhen switching the connectors, make sure to power off the scanner and the computer first.

2 Load documents on the hopper.

VCDemo will be used as an example here to explain the procedure.

When VCDemo is launched

For information on how to launch VCDemo, refer to the "Virtual ReScan (VRS) User Guide". This manual is displayed when you open "VRS User Guide.pdf" from the folder "\VRS\fi-6800\HVRS\ Documents" in the SETUP DISK DVD-ROM.

4 Select a scanner.

31