Attachments and Accessories

General Information

KitchenAid® Attachments are designed to assure long life. The attachment power shaft and hub socket are of a square design, to eliminate any possibility of slipping during the transmission of power to the attachment. The hub and shaft housing are tapered to assure a snug fit, even after prolonged use and wear. KitchenAid® Attachments require no extra power unit to operate them; the power unit is built-in.

 

Attachment

Attachment

 

Knob

 

 

Power Shaft‡

Hinged

 

Attachment

Hub Cover

®

 

 

Housing

Attachment

 

 

Hub Socket

Notch

Pin

‡Not part of mixer.

Attachment Shaft

 

 

Housing

 

General Instructions

To Attach

1.Turn speed control to OFF.

2.Unplug Stand Mixer or disconnect power.

3.Loosen attachment knob by turning it counterclockwise.

4.Flip up hinged hub cover.

5.Insert attachment shaft housing into attachment hub, making certain that attachment power shaft fits into square attachment hub socket. It may be necessary to rotate attachment back and forth. When attachment is in proper position, the pin on the attachment will fit into the notch on the hub rim.

6.Tighten attachment knob by turning clockwise until attachment is completely secured to Stand Mixer.

7.Plug into a grounded 3 prong outlet.

To Remove

1.Turn speed control to OFF.

2.Unplug Stand Mixer or disconnect power.

3.Loosen attachment knob by turning it counterclockwise. Rotate attachment slightly back and forth while pulling out.

4.Replace attachment hub cover. Tighten attachment knob by turning it clockwise.

12

Page 14
Image 14
KitchenAid 400 manual Attachments and Accessories