7 - 2 7. MR Configurator
7.2 System configuration (1) Components To use this software, the following components are r equired in addition to the servo amplifier and servo motor. Equipment (Note 1) Description
OS
IBM PC/AT compatible where the English version of WindowsR98, Windows RMe,
WindowsR2000 Professional, Windows RXP Professional, WindowsRXP Home Edition,
Windows VistaRHome Basic, Windows Vista RHome Premium, Windows Vista RBusiness,
Windows VistaRUltimate, Windows Vista REnterprise operates
Processor
PentiumR 133MHz or more (WindowsR98, WindowsR2000 Professional)
PentiumR 150MHz or more (WindowsRMe)
PentiumR 300MHz or more (WindowsRXP Profes sional, WindowsRXP Home Edition)
32-bit (x86) processor of 1GHz or higher (Windows VistaRHome Basic, Windows Vista RHome
Premium, Windows VistaRBusiness, Windows VistaRUltimate, Windows Vis taREnterprise)
Memory
24MB or more (WindowsR98)
32MB or more (WindowsRMe, Windows R2000 Professional)
128MB or more (WindowsRXP Professional, Windows RXP Home Edition)
512MB or more (Windows VistaRHome Basic)
1GB or more (Windows VistaRHome Premium, Windows VistaRBusiness, Windows Vist aR
Ultimate, Windows VistaREnterprise)
(Note 2, 3)
Personal computer
Hard Disk 130MB or more of free space
Browser Internet Explorer 4.0 or more
Display One whose resolution is 800 600 or more and that can provide a high color (16 bit) display.
Connectable with the above personal computer.
Keyboard Connectable with the above personal computer.
Mouse Connect able with the above personal computer.
Printer Connectable with the above personal computer.
USB cable MR-J3USBCBL3M
RS-422/232C conversion cable DSV-CABV (Diatrend) is recommended.
Note 1. Windows and Windows Vista are the registered trademarks of Microsoft Corporation in the United States and other
countries.
Pentium is the registered trademarks of Intel Corporation.
2. On some personal computers, MR Configurator may not run properly.
3. 64-bit Windows XP and 64-bit Windows Vista are not supported.