Mitsubishi Electronics MR-J3, MR-J3- T - page 291

7 - 16
7. MR Configurator
d)
e)
f)
g)
h)
l)
m)
a)
b)
i)
j)
k)
c)
(1) Servo motor speed setting ( a) )
Enter a new value into the "Motor speed" input field and press the enter key.
(2) Acceleration/deceleration time constant s etting ( b) )
Enter a new value into the "Accel/decel time" input field and press the enter key.
(3) Moving distance setting ( c) )
Enter a new value into the "Move distance" input field and press the enter key.
(4) Servo motor start ( d), e) )
Click the "Forward" button to rotate the servo m otor in the forward rotation direction.
Click the "Reverse" button to rotate the serv o motor in the reverse rotation direction.
(5) Temporary stop of servo motor ( f) )
Click the "Pause" button to stop the servo motor temporarily.
(6) Servo motor restart ( g) )
Click the "Restart" button during the temporary stop to res tart the rotations for the remaining move distance.
Enter a new value into the "Motor speed" input field and press the enter key.
(7) Move distance clear ( h) )
Click the "Remaining distance clear" durin g the temporary stop to clear the remaining m ove distance.
(8) LSP/LSN (stroke end) automatic ON setting ( i) )
Put a check mark in the check box to automatically tur n ON LSP/LSN. After selecting the check box, the
LSP and the LSN of external signal are ignored.
(9) Automatic ON setting for the movement to the Z-phase signal ( j) )
To move to the first Z-phase signal of the m ove distance + move direction, put a check mark in t he check
box.