16 - 22
16. INDEXER POSITIONING OPERATION
16.2.5 Respond codes (RWrn 2)
If any of the monitor codes, instruction codes, N ext station, Point table Nos./Speed command data set to the
remote register is outside the setting range, th e corresponding error code is set to respond co de (RWwn 2).
"0000" is set if they are normal.
Error related to Monitor code 1/Monitor code 2
Error related to Instruction code/Writing data
Error related to Next station
Error related to point table No./Speed command data
Code No. Error Details
0 Normal answer Instruction was completed normally.
1 Code error The monitor code not in the specifications was set.
Read/write of the point table of No.255 or later was set.
2 Parameter point table
selection error
The parameter No. disabled for reference was set.
3 Write range error An attempt was made to write the parameter or point table data outside the
setting range.