Mitsubishi Electronics MR-J3, MR-J3- T - page 296

7 - 21
7. MR Configurator
Click the "OK" button to display the settin g screen of the Single-step feed.
During the servo on, the confirmation window indicating that the next o peration is in the stop status is
displayed.
After confirming that the operation is in the stop status, click the "OK" button.
b)
c)
d)
e)
g)
f)
a)
(1) Point table No. setting ( a) )
Enter the point table No. into the "Point table No." input field and press the enter key.
(2) Servo motor start ( b) )
Click the "Start" button to rotate the servo m otor.
(3) Temporary stop of servo motor ( c) )
Press the "Pause" button to stop the servo m otor temporarily.
(4) Servo motor stop ( c) )
Click the "Pause" button again during a temporar y stop of the servo motor to clear the remaining moving
distance.
(5) Servo motor restart ( d) )
Click the "Restart" button during the tempor ary stop to restart the rotations for the rem aining move distance.
(6) Move distance clear ( e) )
Click the "Remaining distance clear" durin g the temporary stop to clear the remaining m ove distance.