14 - 27
14. OPTIONS AND AUXILIARY EQUIPMENT
(d) MR-J3-11KT(4)-PX to MR-J3-22KT(4)-PX (when using the regenerative option)
The MR-J3-11KT(4)-PX to MR-J3-22KT(4)-PX servo am plifiers are not supplied with regenerative
resistors. When using any of these servo amplifiers, always use the MR- RB5E, 9P, 9F, 6B-4, 60-4 and
6K-4 regenerative option.
The MR-RB5E, 9P, 9F, 6B-4, 60-4 and 6K-4 are regenerative options that have encased the GRZG400-
1.5 , GRZG400-0.9 , GRZG400-0.6 , GRZG400-5.0 , GRZG400-2.5 , GRZG400-2.0 respectively.
When using any of these regenerative options, make the same parameter setting as when using t he
GRZG400-1.5 , GRZG400-0.9 , GRZG400-0.6 , GRZG400-5.0 , GRZG400-2.5 , GRZG400-2.0
(supplied regenerative resistors or regener ative option is used with 11kW or more ser vo amplifier).
Cooling the regenerative option with cooling f ans improves regenerative capability.
The G3 and G4 terminals are for the thermal pr otector. G3-G4 is opened when the regenerative option
overheats abnormally.
G3
G4
C
P
C
P
P1
Servo amplifie
r
Do not remove
the short bar.
Configure up a circuit which
shuts off main circuit power
when thermal protector operates.
(Note)
Regenerative option
Note. Specifications of contact across G3-G4
Maximum voltage : 120V AC/DC
Maximum current : 0.5A/4.8VDC
Maximum capacity : 2.4VA
Regenerative power [W]
Servo amplifier Regenerative option
model Resistance [ ]Without
cooling fans
With
cooling fans
MR-J3-11KT-PX MR-RB5E 6 500 800
MR-J3-15KT-PX MR-RB9P 4.5 850 1300
MR-J3-22KT-PX MR-RB9F 3 850 1300
MR-J3-11KT4-PX MR-RB6B-4 20 500 800
MR-J3-15KT4-PX MR-RB60-4 12. 5 850 1300
MR-J3-22KT4-PX MR-RB6K-4 10 850 1300
When using cooling fans, install them using t he mounting holes provided in the bottom of the
regenerative option. In this case, set " FA" in parameter No.PA02.
Mounting screw
4-M3
(92 92, minimum air flow: 1.0m3)
MR-RB5E 9P 9F 6B-4 60-4 6K-4
Top
Bottom
TE1
G4 G3 C P
TE
2 cooling fans