7 - 17
7. MR Configurator
(10) Pulse move distance unit selection (k)
Select with the option buttons whether the moving distance set is in the command input pulse unit or in the
encoder pulse unit.
(11) Servo motor software forced stop (1))
Click the "Software forced stop" button to stop the ser vo motor rotation immediately. When the "Software
forced stop" button is enabled, the "Forward" and "Rever se" buttons cannot be used. Click the "Software
forced stop" button again to make the "Forward" and "Reverse" bu ttons enabled.
(12) Positioning operation window closing ( m ) )
Click the "Close" button to cancel the posit ioning operation mode and close the window.
(13) Switching to CC-Link operation mode
To switch from the test operation mode to the CC-Link operat ion mode, turn OFF the power of the servo
amplifier.