7 - 13
7. MR Configurator
7.7 Test operation
CAUTION
When confirming the machine operation in the t est operation mode, use the
machine after checking that the safety mechan ism such as the forced stop (EMG)
operates.
If any operational fault has occurred, stop oper ation using the forced stop (EMG).
7.7.1 Jog operation
POINT
For the program operation, refer to the manual of MR Configurator.
The servo motor will not operate if the forced stop (EMG), forward rotation
stroke end (LSP) and reverse rotation stroke end (LSN) are off. Make
automatic ON setting to turn on these devices or make device setting to
assign them as external input signals and turn on across these signals and
SG. (Refer to section 7.6.)
When an alarm occurs, the JOG operation is automatically canceled.
Click "Test" on the menu bar and choose "Jo g" on the menu.
Clicking displays the confirmation window f or switching to the test operation mode.
Click the "OK" button to display the settin g screen of the Jog operation.
During the servo on, the confirmation window indicating that the next o peration is in the stop status is
displayed.
Turn the servo off, confirm that the operation is in th e stop status, and click the "OK" button to display the
setting screen for the Jog operation.