English
Warning indicators and messages
If indicators and messages appear on the screen, check the following: See the page in parentheses “( )” for more information.
Warning indicatorsC:21:00 | |
|
|
•The file is corrupted. •The file is unreadable.
•You are trying to carry out MEMORY MIX function on moving picture.
C:21:00
EThe battery is dead or nearly dead
Slow flashing:
•The battery is nearly dead.
Depending on the operating conditions, environment and battery condition, the E indicator may flash, even if there are approximately 5 to 10 minutes remaining.
Fast flashing:
•The battery is dead.
%Moisture condensation has occurred*
Fast flashing:
•Eject the cassette, turn off your camcorder, and leave it for about 1 hour with the cassette compartment open (p. 221).
Warning indicator as to cassette memory*
Slow flashing:
•No tape with cassette memory is inserted (p. 213).
Warning indicator as to “Memory Stick”**
Slow flashing:
•No “Memory Stick” is inserted.
Fast flashing:
•The “Memory Stick” is not readable with your camcorder (p. 137).
•The image cannot be recorded on “Memory Stick” (p. 158).
Warning indicator as to “Memory Stick” formatting**
Fast flashing:
•“Memory Stick” is not formatted correctly (p. 125).
•The “Memory Stick” data is corrupted.*
QWarning indicator as to tape
Slow flashing:
•The tape is near the end. •No tape is inserted.*
•The
Fast flashing:
•The tape has run out.*
ZYou need to eject the cassette*
Slow flashing:
•The
Fast flashing:
•Moisture condensation has occurred (p. 221). •The tape has run out.
•The
-The still image is protected*
Slow flashing:
•The still image is protected (p. 186).
Warning indicator as to the flash (optional)
Slow flashing: •During charging.
Fast flashing:
•There is something wrong with the flash (optional) while charging.
*You hear the melody or beep sound.
**
202