![](/images/backgrounds/275910/275910-267103x1.png)
Performance Verification
Performance Tests
This subsection contains a collection of procedures for checking that the
AWG710 Arbitrary Waveform Generator performs as warranted.
The procedures are arranged in eight logical groupings, presented in the following order:
Table
| See |
|
|
| (performance |
| See |
Titles | verification) | Test items | (specifications) |
|
|
|
|
Operating mode tests | Page | Continuous, Triggered, and Gated mode | Page |
|
|
|
|
Amplitude and offset accuracy tests normal out | Page | Amplitude accuracy, and DC offset accuracy | Page |
|
|
|
|
Amplitude, DC offset and rise time accuracy | Page | Amplitude accuracy, DC offset accuracy and | Page |
tests direct DA out |
| Rise time accuracy |
|
|
|
|
|
Pulse response tests normal out | Page | Rise time accuracy | Page |
|
|
|
|
Trigger input tests | Page | Trigger level accuracy, and Trigger function | Page |
|
| normality |
|
|
|
|
|
Event input and enhanced mode tests | Page | External event input function normality, and | Page |
|
| Event mode normality |
|
|
|
|
|
1/43Clock3frequency3and310 MHz reference input | Page | 1/43clock3output3frequency3and3 | Page |
tests |
| Reference input normality accuracy |
|
|
|
|
|
Marker output tests | Page | Marker output level accuracy | Page |
|
|
|
|
The performance tests confirms all the characteristics that are designated as checked in Appendix A:Specifications. (The characteristic items that must be checked are listed with the check mark (n) in Appendix A: Specifications).
NOTE. These procedures extend the confidence level provided by the basic procedures described on page 4±3. The basic procedures should be done first, followed by the Performance Tests, if desired.
AWG710 Service Manual |