Tektronix 070-A830-51 manual 107

Performance Verification

Performance Check/Adjustment Files

NOTE. The floppy disk file list displayed on the screen does not automatically update when you replace the diskette with another diskette. To update the file list, reselect the floppy disk drive.

Table 4±3 lists the sequence and waveform files on the Performance Check/Ad- justment disk that are used in these performance tests, the AWG710 Arbitrary Waveform Generator front panel settings that each file sets up, and the performance test that uses each file.

NOTE. The files on the Performance Check disk are locked (files are marked by

the icon in the file list), so the data in these files cannot be changed unless the lock is opened.

Table 4-3: Waveforms and sequences in performance check disk

No.	File name	EDIT menu			SETUP menu				Marker	Usage
									setup
		Form		Points	Clock	Filter	Ampl	Offset
1	MODE.WFM		1000		4 GHz	Through	1=V	0=V	Marker	Run mode,Trigger level,
									1,2: 0 to	Internal trigger accuracy
									499:
									High,
									500 to
									999: Low
2	PULSE.WFM		1000		100 MHz	Through	1=V	0=V		Pulse response
3	AMP1.SEQ									Amplitude accuracy
										￿Normal out￿, Marker
4	AMP2.SEQ									Amplitude accuracy
										￿Direct out￿
5	DC_P.WFM			1000	100 MHz	Through	1=V	0=V		Amplitude accuracy
	￿AMPx.SEQ￿ 1
6	DC_M.WFM			1000	100 MHz	Through	1=V	0=V		Amplitude accuracy
	￿AMPx.SEQ￿ 1
7	DC0.WFM			1000	100 MHz	Through	1=V	0=V		Amplitude accuracy
	￿AMP2.SEQ￿
8	OFFSET.WFM			1000	100 MHz	Through	20 mV	0=V		Offset accuracy

AWG710 Service Manual 4-11