Options and Accessories

Options

Option 1R (Rack

Mounting)

Option D1 (Test Result Report)

Option 01 (32 MB Words Memory)

Option 02 (High Bandwidth Output)

Option 10 (Flash Disk)

This subsection describes the following options available with the AWG710 Arbitrary Waveform Generator Arbitrary Waveform Generator:

AWG710 Arbitrary Waveform Generator. comes configured for installation in a 19-inch wide instrument rack. For later field conversions, order Rack Mount Kit (020±A045±00) or contact your local Tektronix sales office or representative.

A calibration data test result report will be provided with the AWG710 Arbitrary Waveform Generator when this option is specified.

Increase memory length up to 32 MB (32400000 points).

Expand output bandwidth

The product which has option 02 doesn't have offset and lowpass filter function, also, main output amplitude of 20mVpk-pk to 2Vpk-pk is changed to 500mVpk- pk to 1Vpk-pk into a 50 Ohm load.

Flash disk addition. The hard disk is deleted when this option is ordered. This option allows 24 hour continuous operation. The number of points used in the Waveform Editor is restricted because of the reduced disk space.

The AWG710 Arbitrary Waveform Generator retains the state of the front panel ON/STB switch. The ON/STB switch must be left in the on position to be able to power on and power off the instrument using the principal power switch.

NOTE. If the ON/STBY switch is left in the STBY position, you will not be able to power on/off the instrument using the PRINCIPAL POWER SWITCH or an external power switch unit.

7-2

AWG710 Service Manual