Operating Basics
Table
Icon | Description | Icon | Description |
|
|
|
|
| Displays the file name of |
| Displays the noise signal |
| the waveform, pattern, or |
| level added. |
| sequence file loaded for |
|
|
| output. |
|
|
| Note: Use the View button |
|
|
| to display the loaded |
|
|
| waveform. |
|
|
|
|
|
|
| Displays the low/pass filter |
| Indicates that the channel |
| setting through which the |
| output is enabled or dis/ |
| waveform is passed. |
| abled. If the switch is |
| (except option 02) |
| shown open, that channel |
|
|
| output is disabled. |
|
|
|
|
| Displays the peak/to/peak |
| Indicates that the digital |
| signal amplitude setting. |
| output is enabled or dis/ |
|
|
| abled. If the switch is |
|
|
| shown open, that digital |
|
|
| output is disabled. |
|
|
|
|
| Displays the signal offset |
| Displays the external input |
| setting. |
| added. |
| (except option 02) |
|
|
|
|
|
|
Table
Bottom menu |
|
button | Description |
|
|
Waveform/Sequence | Displays the side menu for loading, viewing, and editing waveform |
| files. |
|
|
Vertical | Displays the Vertical side menu for setting waveform peak/to/peak |
| amplitude, offset, low/pass filter, and other output parameters. |
| The product which has option 02 doesn't have offset and lowpass filter |
| function. |
|
|
Horizontal | Displays the Horizontal side menu for setting the clock source, clock |
| frequency, clock reference, and channel skew parameters. |
|
|
Run Mode | Displays the Run Mode side menu for setting the instrument run mode. |
| Refer to Run Modes for an explanation of the different run modes. |
|
|
Trigger | Displays the Trigger side menu for setting trigger source, slope, level, |
| external trigger impedance, and interval parameters. |
|
|
Save/Restore | Displays the Save/Restore side menu to save and restore setup output |
| parameters. |
|
|
AWG710 Service Manual |