Tektronix 070-A830-51 manual 30

Specifications

Table 1-6: Main output (Cont.)

Characteristics 3			Description				PV reference page
		Resolution	1 mV
		nAccuracy	"	"			Page 4-22
			1.5% of offset		10 mV,
			(20 mV amplitude, waveform data: 0)
	Pulse response		(Waveform data: -1 and 1, offset: 0 V, and filter: through)
		nRise time (10% to 90%)	x480 ps (amplitude = 1.0 Vpk?pk, calculated value y729 MHz)				Page 4-35
		nFall time (10% to 90%)	x480 ps (amplitude = 1.0 Vpk?pk, calculated value y729 MHz)
		Aberration, Typical	"		+	1.0 Vpk?pk, using>6 GHz bandwidth>oscillo?
			6% (amplitude
			scope)
		Flatness, Typical	"
			3% (after 20 ns from rise and fall edges)
	Sinewave characteristics		(Clock: 4.0 GS/s, waveform points: 32, Signal frequency: 125 MHz,
			amplitude: 1.0 V, offset: 0 V, filter: through)
		Harmonics	x-40 dBc (DC to 1000 MHz)
		Noise	x-50 dBc (DC to 1000 MHz)
		Phase Noise, Typical	x-85 dBc / Hz (at 10 kHz offset)
Direct DA out (except option 02)
	Amplitude
		Range	20 mVpk?pk to 1 Vpk?pk, into a 50 W load
		nDC Accuracy	"				Page 4-27
			(2% of Amplitude + 2 mV)
		Resolution	1 mV
	n DC offset accuracy		0 V "10 mV, (20 mV amplitude, waveform data: 0)				Page 4-27
	nPulse response		(Waveform data: -1 and 1, at 0.5 Vpk?pk)				Page 4-29
		Rise time (10% to 90%)	x280 ps (calculated value y1.25 GHz)
		Fall time (10% to 90%)	x280 ps (calculated value y1.25 GHz)
Extended Bandwidth output
(option 02)
	Amplitude
		Range	500 mVpk?pk to 1 Vpk?pk, into a 50 W load
		nDC Accuracy	"				Page 4-31
			(2 % of Amplitude + 2 mV)
		Resolution	1 mV
	n DC offset accuracy		0 V "10 mV, (500 mV amplitude, waveform data: 0)				Page 4-31
	nPulse response		(Waveform data: -1 and 1, at 1 Vpk?pk)				Page 4-33
		Rise time (10 % to 90 %)	x175 ps (calculated value y2 GHz)
		Fall time (10 % to 90 %)	x175 ps (calculated value y2 GHz)

3The characteristics are specified at the end of the SMA cable (012+1565+00) except for DC accuracy.

1-6 AWG710 Service Manual