Operating Basics
Caret
Text field
Character palette 
Name list
Text field
Character palette
Text field
Figure
File Name Input Verify that the character palette is highlighted and that the general purpose knob is displayed. You cannot select characters if the character palette is not high- lighted. Use the y and b arrow buttons to highlight the character palette, if necessary.
Do the following steps to input the file name:
1.Push the y and b arrow buttons to move the caret in the text field.
2.Use the general purpose knob to select the character.
3.Push the ENTER button or 
button to insert the selected character at the caret position.
Repeat step 1 through step 3 to input the file name.
The current directory file list is displayed in the character palette field. By default, the file is stored in the current directory. If you want to store the file in another directory, use the general purpose knob to move to another directory. If you want to store the file in another drive, push DRIVE... (side) to change the drive. You can select the Up Level, Down Level (side) to move to another directory.
AWG710 Service Manual |