Tektronix 070-A830-51 Messages and Codes

Messages and Codes

Error and event codes with negative values are SCPI standard codes. Error and event codes with positive values are unique to the waveform generator series number.

Table 6±5 lists event code definitions. When an error occurs, you can find its error class by checking for its the code range in Tables 6±6 through 6±14. Events in these tables are organized by event class.

Table 6-5: Definition of event codes

Event class	Code range	Description
No error	0	No event or status
Command errors	-100 to -199	Command syntax errors
Execution errors	-200 to -299	Command execution errors
Device.specific errors	-300 to -399	Internal device errors
Query errors	-400 to -499	System event and query errors
Power.on events	-500 to -599	Power.on events
User request events	-600 to -699	User request events
Request control events	-700 to -799	Request control events
Operation complete events	-800 to -899	Operation complete events
Extended device.specific errors	1 to 32767	Device dependent device errors
Reserved	other than above	not used

AWG710 Service Manual 6-59