Operating Basics
Arrow Buttons Use the use arrow buttons to move the cursor to a desired position.
Use y and b arrow buttons to move the cursor up or down in a
Use a and ' arrow buttons to make a selection in a dialog box, move the input caret when you enter numerics with the general purpose knob, or move a cursor in the Editor menu.
CLEAR MENU button You can use the CLEAR MENU button on the front panel to cancel the bottom menu selection or side menu selection just before you selected it.
Numeric Input You can enter numeric values by using either the numeric keypad or the general purpose knob. If the side menu item displays a value, you can change this value using the general purpose knob or numeric buttons.
Knob icon | Current Setting |
Underscore
Figure
General Purpose Knob. A knob icon with a numeric value that includes an underscore character indicates that you can change the value at the underscore location by using the general purpose knob or keypad buttons. By default, the underscore character is positioned beneath the digit specified depending on the parameters. You can only change the value represented by the digits at and to the left of the underscore. Use the a and ' arrow buttons to move the underscore to the desired position and then turn the general purpose knob to change the value.
If the numeric value displays the knob icon, but does not show the underscore, then turn the general purpose knob to cycle through the predefined set of values.
When using the general purpose knob, values that you change in side menus and menu screens take effect immediately. Values in
AWG710 Service Manual |