Operating Basics
NOTE. In the following procedures, you may have to push the EDIT button twice to exit the editor. When the instrument does not display the file list, push the EDIT button again. If you are prompted, refer to Saving Files on page 2±33.
Copying Files You can copy files in from a double window or a single window. In a double window, push the Copy button to copy the selected file in the active window into the desired window.
Copying files in double windows. Do the following steps to copy files selected in the active window:
1.Push EDIT (front) button and select the file to copy.
2.Push Window (bottom)Window (side) to select Double. Two file windows are displayed.
3.Push Select (side) to select the active window.
4.Push Directory (bottom)Up Level, Down Level, or Make Directory (side) to select the destination.
5.Push Select (side) to activate the window into which you are going to copy the file and then select the file.
6.Push File (bottom)Copy (side) to copy the file to the destination as the same file name.
If the directory name is the same as the destination directory name, you will be asked to confirm to overwrite the file.
Copying files in single window. Do the following steps to copy files selected in single window:
1.Push EDIT (front) button and select the file to copy.
2.Push File (bottom)Copy (side) and select the file name and destination.
3.Push OK (side) to copy the file. The file is copied and renamed.
NOTE. For additional file copying and file moving procedures, refer to Double
Windows on page 2±36.
AWG710 Service Manual |