Operating Basics
Deleting Files You can delete a file or directory by doing the following steps:
NOTE. You cannot delete a file or directory if the file or directory is set to 'read only'. Also, you can only delete a directory if the directory is empty.
1.Push EDIT (front).
The instrument displays the file list.
2.Select the file to delete.
3.Push File (bottom)Delete (side). The instrument displays a message box asking you to confirm deleting the file.
4.Push OK (side) to delete the file or Cancel to cancel the operation and keep the file.
You can also delete all files on the current drive and directory by doing the following steps:
1.Push EDIT (front)File (bottom)Delete All (side).
The instrument displays a message box asking you to confirm deleting all files.
2.Push OK (side) to delete all files or Cancel to cancel the operation and keep all files.
Read Only Attribute To change the read only or read/write attributes on a file, do the following steps:
1.Push EDIT (front).
The instrument displays the file list.
2.Select the file to change the attribute.
3.Push File (bottom)Attribute xxxx (side).
The xxxx is the Read/Write or Read Only attribute of the selected file. Pushing this side button immediately changes the file attribute.
Files with a read only attribute are identified by 
icon, and the directories by 
icon. See Figure 2±17.
AWG710 Service Manual |