Specifications
This section contains the AWG710 Arbitrary Waveform Generator specifications. All specifications are guaranteed unless labeled Typical. Typical specifications are provided for your convenience.
Specifications that are marked with the n symbol in the Characteristics column are defined in the Performance erification section. The corresponding page of the performance verification procedures can be found in the PV reference page column.
Subcategories of the Characteristics column will appear in boldface font.
See Tables 1±2 through 1±21 for characteristics and descriptions of the electrical specifications. For signal timing, see Figure 1±1 and for mechanical dimensions, see Figure 1±2.
Performance Conditions Performance limits in this specification are valid under these conditions:
The AWG710 Arbitrary Waveform Generator must be calibrated/adjusted at an ambient temperature between +20_ C and +30_ C.
The AWG710 Arbitrary Waveform Generator must be in an environment with temperature, altitude, humidity, and vibration within the operating limits described in these specifications.
The AWG710 Arbitrary Waveform Generator must have a
The AWG710 Arbitrary Waveform Generator must be operating at an ambient temperature between +10_ C and +40_ C.
Warranted characteristics are described in terms of quantifiable performance limits.
AWG710 Service Manual |