E6580757
6
[0: Supply voltage uncorrected, output voltage limited]
|
| Input voltage |
| ⋅ | |
Rated voltage | ||
|
| High |
Input voltage | ||
Output voltage |
| Low |
[V] |
Output frequency
* The above applies when V/F control mode
selection parameter | is set to "0" or "1". |
the output voltage can be |
| Rated voltage | 1 prevented from exceeding the | ||
|
|
| input voltage. | |
|
| [3: Supply voltage uncorrected, | ||
|
|
|
| output voltage unlimited] |
|
| ⋅ |
| Input voltage |
| Rated voltage |
| High | |
| Input voltage |
|
| |
| Output voltage [V] |
| Low | |
|
|
| ||
|
|
| Output frequency | |
| * The above applies when V/F control mode | |||
| selection parameter | is set to "0" or "1". |
the output voltage can be
1 prevented from exceeding
Rated voltage the input voltage.
[1: Supply voltage corrected,
| output voltage limited] |
| Input voltage |
| High |
Outputvoltage | Low |
[V] | |
| Output frequency |
[4: Supply voltage corrected, output voltage unlimited]
Input voltage
| High |
Output voltage | Low |
[V] |
Output frequency
* Even if is set for an output voltage lower than the input voltage, the output voltage will exceed the voltage
adjusted by when the output frequency is higher than the base frequency 1 .
The settings to " " and " " [supply voltage corrected (off during deceleration)] mean the same op- eration as those to " " and " ", respectively, except during deceleration. These settings prevent overvolt- age during deceleration, while minimizing decreases in