Toshiba VF-S9 manual 5cm 5cm

E6580757

• Do not install in any location of high temperature, high humidity, moisture condensation and freezing and avoid locations where there is exposure to water and/or where there may be large amounts of dust, metallic fragments and oil mist.

• Do not install in any location where corrosive gases or grinding

	fluids are present.
•	Operate in areas where ambient temperature ranges from -10°C to 60° C.	1
	(Operation over 40° C is allowed when peel off the top warning label. And operation over 50° C is al-

lowed when reduce to 70° C or less of rated current.)

5cm

5cm

5cm

Measurement position

Measurement position

Note: The inverter is a heat-emitting body. Make sure to provide proper space and ventilation when install- ing in the cabinet. When installing inside a cabinet, we recommend peel of the top seal although 40° C or less.

•Do not install in any location that is subject to large amounts of vibration.

Note:	If the VF-S9 Inverter is installed in a location that is subject
	to vibration, anti-vibration measures are required. Please
	consult with Toshiba about these measures.

•If the VF-S9 Inverter is installed near any of the equipment listed below, provide measures to insure against errors in operation.

Solenoids:	Attach surge suppressor on coil.
Brakes:	Attach surge suppressor on coil.
Magnetic contactors:	Attach surge suppressor on coil.
Fluorescent lights:	Attach surge suppressor on coil.
Resistors:	Place far away from VF-S9 Inverter.

A-17