Toshiba VF-S9 Table of input terminal functions 3/3, Table of output terminal functions 1/2, K-10

E6580757

■Table of input terminal functions (3/3)

Function	Code	Function			Action
No.
45	EXTN	Inversion of trip stop command from external de-	OFF:	-trip stop
		vice
46	OH	Thermal trip stop signal input from external device	ON: trip stop
47	OHN	Inversion of thermal trip stop command from ex-	OFF:	trip stop
		ternal device
48	SC/LC	Remote/local control forced switching	Enabled when remote control is exercised
			ON: Local control
			(setting of		and	)
			OFF: Remote control
49	HD	Operation holding (stop of 3-wire operation)	ON: F (forward run)/R: (reverse run) held, 3-wire
			operation
			OFF: Slowdown stop
50	SDBF	Forward run after DC braking	ON: Forward run after DC braking
			OFF: Slowdown stop
51	SDBR	Reverse run after DC braking	ON: Reverse run after DC braking
			OFF: Slowdown stop

■Table of output terminal functions (1/2)

	Function	Code	Function		Action
	No.
	0	LL	Frequency lower limit	ON: Output frequency is equal to or higher than
					value.
				OFF: Output frequency is lower than
					value.
	1	LLN	Inversion of frequency lower limit	Inversion of LL setting
	2	UL	Frequency upper limit	ON: Output frequency is equal to or higher than
					value.
				OFF: Output frequency is lower than
					value.
	3	ULN	Inversion of frequency upper limit	Inversion of UL setting
	4	LOW	Low-speed detection signal	ON: Output frequency is equal to or higher than
					set value.
				OFF: Output frequency is lower than
					set value.
	5	LOWN	Inversion of low-speed detection signal	Inversion of LOW setting
	6	RCH	Designated frequency reach signal (completion of	ON: Output frequency is within (input frequency
			acceleration/deceleration)	±	set frequency).
				OFF: Output frequency exceeds (input frequency
				±	set frequency).
	7	RCHN	Inversion of designated frequency reach signal	Inversion of RCH setting
11			(inversion of completion of acceleration/
			deceleration)
	8	RCHF	Set frequency reach signal	ON: Output frequency is within
				(	set frequency ±	set
				frequency).
				OFF: Output frequency exceeds
				(	set frequency ±	set
				frequency).
	9	RCHFN	Inversion of set frequency reach signal	Inversion of RCHF setting
	10	FL	Failure FL (trip output)	ON: When inverter is tripped
				OFF: When inverter is not tripped
	11	FLN	Inversion of failure FL (inversion of trip output)	Inversion of FL setting
	12	OT	Over-torque detection	ON: Torque current is equal to or larger than
				set value and longer than		set time.
				OFF: Torque current is lower than		set
				value.
	13	OTN	Inversion of over-torque detection	Inversion of OT setting
	14	RUN	RUN/STOP	ON: When operation frequency is output or during
				DC braking ( )
				OFF: Operation stopped

K-10