Brady 76800 Setting Application Preferences, Setting frame length, Line width value, Line color

Line width	Use to set a width for the line that composes the
	frame. The default is 0, which means no line
	appears on the label.
	If Cut out frame is enabled, the system ignores the
	Line width value.
Line color	Use to access the Object Color screen, which lets
	you set a line color appropriate for the installed
	ribbon. See Applying Color to Objectsn page 8-5.
OK	Choose to signal that your settings are complete.
	The completed label displays in the Editor window.
	If you have set a Line width value greater than 0, a
	frame of the shape you selected appears around the
	outer edge of the label.
Cancel	Choose to return to the Editor window, where the
	label displays unchanged.

Setting frame length

The system uses the length of the label you set in the Label Properties Size screen to set the length of a frame.

When you do not set a length, leaving it to be automatically calculated by the system, it sets the frame length according to the data it finds.

If you add or remove objects from the label, the system does not automatically resize a frame. To resize the frame, you must remove the existing frame and add a new one.

Setting Application Preferences

Application Preferences settings are very similar to System Setup settings (described in CHAPTER 5: Setting Preferences, beginning on page 5-1). In some applications, the Application Preferences screens allow you to set application- specific preferences that apply to the application only. In most cases, however, the Application Preferences tabs provide system-wide settings. In fact, several

Working with Labels 6-33