Brady 76800 manual Naming supply colors, To supply names for new ribbons or tapes

Cutter

Calibration:

Horizontal (x)

Vertical (y)

Color & Cut system only. Re-sets the factory-set calibration values for the plotter cutter in your system. Enter positive or negative whole numbers to adjust the horizontal or vertical values by one/one thousandth of an inch for each increment.

Note: Use caution when calibrating your plotter cutter. To return to the factory-set values, see the calibration label placed inside your printer at the factory, and reinstate the values shown on that label.

See Calibrating the Cutter on page 10-11for more information.

Naming supply colors

When new tape or ribbon supplies become available after your print system is shipped to you, your system will not have internal information about those new supplies. The Check Supply Colors button lets you supply the names of new supplies and store them in your system.

To supply names for new ribbons or tapes

1.Install the new tape or ribbon in your system.

2.Choose the Check Supply Colors button on the Hardware options tab. The Check Supply Colors screen displays:

Sample of color to be named is shown in the Multicolor and Color & Cut systems only.

Figure 5-4. The Check Supply Colors screen.

Setting Preferences 5-9