Also, not all tape supplies are appropriate for cutting. If the cutter cannot use the tape installed in your printer, the Cut out option on the Insert Object screen will be grayed out.

Adding cut out objects

When you add objects to your label, the Insert Object screen gives you the choice to insert a Print object or a Cut out object, as shown here:

Figure 10-1. The Insert Object screen on the Color & Cut system.

zIf you choose Print object, you may only print the object, although in some cases, the object may be cut around. See Cutting Around Objects - 10-8to learn how to cut around a print object.

zIf you choose Cut out object, the object may only be cut out, and not printed.

Hint! You can change some existing print objects to cut out objects and vice- versa, by going to the General tab on the object’s Properties screen and choosing the appropriate option. See Changing Objects on page 7-31for instructions.

To create a cut out object

1. From the Editor window (shown in A sample Editor window with cut bounding box displayed. - 10-9), choose Insert Object.

10-4Creating Cut Out Objects

Page 191
Image 191
Brady 76800 manual Adding cut out objects, To create a cut out object