Removing the Stylus Holder

Follow these instructions to remove the stylus for adjusting, cleaning, or replacing.

Step 1: Turn the power off, then open the printer.

Step 2: Move the stylus holder mechanism to the center of the track, to make it easier to work with.

Step 3: To disengage the stylus holder, turn it counterclockwise to unscrew it, as shown in Figure B-1.

Figure B-1. Removing the stylus holder.

Step 4: Pull straight up to remove the stylus holder from the tracking mechanism.

Cutter Maintenance

B-3

Page 256
Image 256
Brady 76800 manual Removing the Stylus Holder, Figure B-1. Removing the stylus holder