Brady 76800 manual General tab options are

The General tab options are:

Rotation	For all systems. Use the scroll arrows to choose
	from the list of rotation angles. For example, to
	rotate an object 45 degrees, choose 45.
	Note: For bar code objects, the only valid values
	are 0 and 90 degrees.
	After rotating an object, you may not set an absolute
	size for that object. You may, however, use the
	Increase Size and Decrease Size tools to change
	the size. (See Using Increase Size and Decrease
	Size on page 7-28)
No fill/Solid fill	These options appear on the HotShape Properties
	General tab only. Select to set the default fill for the
	HotShape object. The fill is the background pattern
	inside the object. Choose:
	• No fill to leave objects transparent.
	• Solid fill to make the background inside the
	object a solid color.
Print/Cut out	For the Color & Cut system only. Set to indicate
	that the object is for printing or to be cut out. In the
	Monocolor and Multicolor systems, print object is
	the only option. See Creating Cut Out Objects on
	page 10-3for complete information.
Cut bounding box	For the Color & Cut system only. Use to apply a
	bounding box to a print object, so the object can be
	cut out.
Weeding	For the Color & Cut system only. Use to apply a cut
	around the outside of a cut text object. You can then
	strip the waste from around the text.
Line width field	For all systems. Use to set and to view a line width
	for a frame for a text object. The default is 0, which
	indicates that the object is not framed. A sample of
	the line width you select is shown next to the field.
	See Figure 7-18 on page 7-34.

Working with Objects 7-35