
Setting bar code dimensions
Choose the Dimension tab on the Bar Code screen to set bar code measurements:
Figure 7-12. The Bar Code screen, Dimensions tab.
Use the Dimension tab to set these bar code options:
Height | Set the bar code height (in the unit of measure | |
| specified on the System Setup screen Localization | |
| tab) by entering a height or choosing from the | |
| options list. | |
| Hint! | If you want to make a bar code taller, |
| setting the height here is preferable to using the | |
| Height option on the Bar Code Size and Location | |
| tab. |
|
|
| |
Density | Set the density in mils by choosing from this list. | |
| The density is the thickness of the bars and how far | |
| apart they are. | |
| Hint! | This setting determines the width of the |
| bar code. | |
|
| |
Ratio | Set the width ratio by choosing from this list. Ratio | |
| determines the relative width of the wide bars to the | |
| narrow bars in the bar code. | |
|
|
|