Brady 76800 manual Cutting out text objects, To cut out text objects, HotShape object

2.On the Insert Object screen (Figure 10-1), choose Cut out object.

3.Select the type of object you want to cut out. The type you choose determines the screen you will see next:

If you choose:	You’ll see:
Text object	The Enter Text screen (Figure 7-3 on page 7-
	5). You can choose from these fonts for cut out
	text objects:
	• Arial 65 for BRC
	• Arial for BRC
	• Times New Roman for BRC.
	Only normal text is supported. Cut out text
	may not be bolded, italicized, or underlined.
Graphic object	The Graphics screen, shown in Figure 7-15
	on page 7-23,with special options for cut out
	graphics listed.
HotShape object	The HotShapes screen, shown in Figure 7-16,

Cutting out text objects

The cutter cuts out each individual character in a Text cut out object.

Hint! See Weeding cut out text objects - 10-6to learn how to make an additional cut around the cut out text, for ease of use when removing the cut out characters.

To cut out text objects

1.After selecting the Cut out object option on the Insert Objects screen, choose Text.

2.On the Enter Text screen (shown in Figure 7-3 on page 7-5), enter the characters you want to cut out.

3.Press OK when you’re finished. You’ll see the cut out new text object on the Editor window.

4.Choose Print to cut out the object.

Working with Cut-outs 10-5