Brady 76800 manual Ending value, Starting value, the Change by value

may no longer be large enough for the entire text string. The text will be cut off on the printed label.

The Sequence options are:

Starting value	Enter the starting value for the sequence in this
	field. You can enter any number, or a single letter of
	the alphabet, but you may not mix both letters and
	numbers in a single sequence. (You may, however,
	enter alphabetic or symbol characters if the first
	character entered is a number: for example, 1A, 2%,
	3*.) The default value is 1.
Change by	Enter the amount by which you want the sequence
	to change on each label. A positive number
	increases the number or letter of the alphabet on the
	label; a negative number decreases the number or
	letter of the alphabet on the label. The default value
	is 1, but you can use larger increments with numeric
	sequences.
	Note:	When you use the letters of the alphabet as
	the sequence, the only valid values for this field are
	1 and -1.
Ending value	Enter the ending value for the sequence. Using the
	Starting value, the Change by value, and the
	Ending value, the system calculates the total
	number of labels to be generated for the sequence,
	and enters it in the Total number field. The default
	value is 1.
	Hint!	You can leave this field blank and instead
	enter the Total number of labels you want to
	produce, and the system automatically calculates
	the Ending value for you.

Working with Objects 7-13