You’ll see the a Properties screen with tabs and options appropriate to the object selected. This is a sample Text Properties screen:

Available on all systems, for all objects. For bar codes, limited to 0 and 90.

Available on all systems, for all objects

Print object is assumed on Monocolor and Multicolor systems

Available on Color & Cut system only

Available on all systems, for all objects

Figure 7-18. A generic Properties General tab.

The values shown on the screen are the current values of the selected text object.

Note: Object Properties screens are not accessible from the Pipe Marker or Right-To-Know applications. You must use the Preferences key to change properties for those specialty applications.

Setting options on the General tab

The General tab appears on the Properties screens for every type of object. Use the options on the General tab to set the rotation, the fill, the cut options, the line width, and to begin the select color process

Note: As noted below, options offered on the General tab vary according to your system features.

7-34Changing Objects

Page 155
Image 155
Brady 76800 manual Setting options on the General tab, a generic Properties General tab