Choosing color on the Multicolor and Color & Cut systems

If you have the Multicolor or the Color & Cut system, the options offered on the Object Color screen also depend on the type of ribbon installed at the time you choose the Color option.

Note: The Autocut function cannot be applied in multicolor mode.

If you swap in a different ribbon during construction of the label or while editing it, the Object Color screen changes according to the characteristics of the new ribbon, as described in the following sections.

With a continuous color ribbon installed

The Object Color screen looks similar to Figure 8-2when you have a continuous color ribbon installed on your Multicolor or Color & Cut system:

The color boxes show the colors available in continuous color ribbons.

This box shows the background color (the tape installed).

Figure 8-2. Object Color screen, continuous color ribbon on the Color & Cut system.

Hint! Use this screen to set object colors at composition time without having to swap in each ribbon. You won’t have to swap in the different ribbons until you print the label.

Applying Color

8-7

Page 170
Image 170
Brady 76800 manual Choosing color on the Multicolor and Color & Cut systems, With a continuous color ribbon installed