Emerson FM-3 manual 196

FM-3 Programming Module Reference Manual

“Assigned To” and the “Set From” columns should then reflect the assignment that has been made. Figure 78 shows how these assignments are made.

Figure 78: Making Assignments

Notice that a Name can be associated to each input line. Each input line can also have a debounce time.

Name – This 12-character string allows a descriptive name assigned to an input line. This makes the configuration easier to follow.

Debounce – This is the minimum time a specific input must be on, for recognition by the drive/FM-3. This helps prevent false triggering for applications in electrically noisy environments. The units for this parameter are seconds, with resolution of 0.001 seconds.

The Output Lines view shows assignments that have been made to the Outputs group of Destinations in the assignment view. Assignments to this view are made in the same way as assignments to the Input Lines view. After all assignments have been made, the Output Lines view may look like Figure 79.

196