Input Signal Settings - Signal Menu
Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source.
Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing the Auto button on the remote control.
To change settings for an input source, make sure the source is connected and select that source.
Setting | Options | Description |
Auto Setup | On | Automatically optimizes computer |
| Off | image quality (when On) |
|
| |
Resolution | Auto | Sets the input signal resolution if |
| Wide | not detected automatically using |
| the Auto option | |
| Normal | |
|
| |
Tracking | Varying levels available | Adjusts signal to eliminate vertical |
|
| stripes in computer images |
236
