Epson 1430Wi, 1420Wi manual 0BFF

Event ID code	Cause and solution
0479	A projector system error has occurred. Turn the projector off and then on again.
04FF
0891	Cannot find an access point with the same SSID. Set your computer, access point,
	and projector to the same SSID.
0892	The WPA/WPA2 authentication type does not match. Make sure the wireless
	network security settings are correct.
0893	The WEP/TKIP/AES encryption type does not match. Make sure the wireless
	network security settings are correct.
0894	Communication with unauthorized access point was disconnected. Contact your
	network administrator.
0898	Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you
	are not using DHCP, turn off the DHCP setting in the Network menus.
0899	A communication error has occurred. Try restarting the EasyMP Network Projection
	program and restarting your projector. If that does not solve the problem, contact
	Epson for help.
089A	The EAP authentication type does not match the network. Check the wireless LAN
	security settings and make sure that the security certificate is installed correctly.
089B	EAP server authentication failed. Check the wireless LAN security settings and
	make sure that the security certificate is installed correctly.
089C	EAP client authentication failed. Check the wireless LAN security settings and make
	sure that the security certificate is installed correctly.
089D	Key exchange failed. Check the wireless LAN security settings and make sure that
	the security certificate is installed correctly.
0B01	The internal storage could not be detected correctly. Select Delete All Internal Data
	in the Basic menu under Whiteboard Settings. Turn off the projector and disconnect
	the power cord, then reconnect the power cord and turn the projector back on. If that
	does not solve the problem, contact Epson for help.
0BFF	An error has occurred in the whiteboard function. Restart the projector.

Parent topic: Projector Information Display - Info Menu

256