Power light | Status light | Lamp light | Temp light | Status and solution |
Blue | Off | Off | Off | Standby or sleep mode. |
|
|
|
| Network monitoring mode. The |
|
|
|
| projector is being monitored and |
|
|
|
| controlled over the network. |
Off | Flashing blue | Off | Orange | Projector has overheated and turned |
|
|
|
| off. Leave it turned off to cool down. |
|
|
|
| After about five minutes, do the |
|
|
|
| following: |
|
|
|
| • Make sure that the vents and air |
|
|
|
| filter are not clogged with dust or |
|
|
|
| obstructed by nearby objects. |
|
|
|
| • Clean or replace the air filter. |
|
|
|
| • If operating the projector at high |
|
|
|
| altitude, turn on High Altitude |
|
|
|
| Mode. |
|
|
|
| • If the problem persists, unplug the |
|
|
|
| projector and contact Epson for |
|
|
|
| help. |
Off | Flashing blue | Orange | Off | Lamp has a problem. |
|
|
|
| • Check to see if the lamp is burned |
|
|
|
| out, broken, or installed incorrectly. |
|
|
|
| Reseat or replace the lamp as |
|
|
|
| necessary. |
|
|
|
| • Clean or replace the air filter. |
|
|
|
| • If operating the projector at high |
|
|
|
| altitude, turn on High Altitude |
|
|
|
| Mode. |
|
|
|
| • If the problem persists, unplug the |
|
|
|
| projector and contact Epson for |
|
|
|
| help. |
Flashing blue | Varies | Flashing | Varies | Replace the lamp soon to avoid |
|
| orange |
| damage. Do not continue using the |
|
|
|
| projector. |
279
