Setting Up Crestron RoomView Support
Controlling a Networked Projector Using Crestron RoomView
Parent topic: Using the Projector on a Network
Setting Up Crestron RoomView Support
To set up your projector for monitoring and control using a Crestron RoomView system, make sure your computer and projector are connected to the network.
Note: If you want to use the Crestron RoomView system when the projector is turned off, you need to adjust the Standby Mode settings in the ECO menu.
1.Press the Menu button.
2.Select the Network menu and press Enter.
3.Select Network Configuration and press Enter.
4.Select the Administrator Setting menu and press Enter.
5.Set the Crestron RoomView setting to On to allow the projector to be detected.
6.Turn off the projector, then turn it on again to enable the setting.
108
