Epson 1420Wi, 1430Wi manual Projector Placement, Projector Setup and Installation Options

Setting Up the Projector

Follow the instructions in these sections to set up your projector for use.

Projector Placement

Removing and Attaching the Cable Cover

Adjusting the Angle of the Touch Unit

Installing the Projector Feet

Projector Connections

Installing Batteries in the Remote Control

Installing Batteries in the Pens

Installing Batteries in the Control Pad

Projector Placement

Your ultra-short throw projector is designed to be installed on a wall (with a wall mount) or vertically on a table (with a table mount) to create an interactive tabletop workspace.

Keep these considerations in mind as you select a projector location:

•Follow the instructions in the Installation Guide provided with your mounting hardware to install the projector using the included mounting equipment.

•Leave plenty of space around and under the projector for ventilation, and do not place it on top of or next to anything that could block the vents.

•Position the projector within reach of a grounded electrical outlet or extension cord.

•If installing vertically on a desk or table, the table projection mount (V12H516020) is required.

•If installing on a wall, the wall mount (V12H675020) is required.

Projector Setup and Installation Options

Projection Distance

Parent topic: Setting Up the Projector

Projector Setup and Installation Options

You can set up or install your projector in the following ways:

35