Restricted IP Addresses, Subnet Mask, DNS Server

•If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet Mask, DNS server, WINS server,and Gateway Address as needed. When manually entering IP Settings, you cannot use restricted IP addresses.

Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on the remote control. To select a highlighted number, press Enter. Or, press and hold the Num button on the remote control while entering the desired numbers.

10.To prevent display of the IP address on the standby screen, turn off IP Address Display.

11.When you finish selecting settings, select Complete or Setup Complete and follow the on-screen instructions to save your settings and exit the menus.

Restricted IP Addresses

Parent topic: Wired Network Projection

Related references

Projector Network Settings - Network Menu