SRS | Appendix B |
3. You now have two choices:
∙To add or change the CA number, enter the new number and press ENTER.
or
∙To cancel the CA number, press CLEAR (softkey 3) and then ENTER.
The final screen looks like this:
CA=XX(XX)
COMPLETED
If you canceled the CA number, no numbers appear after CA= and the button indicator goes dark.
4.With your Call Appearance assignment complete, you have these choices:
∙To assign another CA, press the desired button and repeat steps 2 and 3.
∙To return to normal operation, press REGISTER.
∙To make additional button assignments, press asterisk
(*). This returns you to the menu mode main menu.
This completes programming of CAs. If you have programmed your SPID, correctly completed this procedure and your ISDN line is properly plugged in you should now be ready to place and receive voice calls. If you encounter problems, review these items for accuracy.
Selection 2: Feature
Activator
1.Press 2 and ENTER. This screen appears:
FEATURE ACTIVATOR MODE
SELECT ASSIGN KEY
The set's indicators show button status as follows:
∙Green indicates a button already assigned to a network feature.
∙Red indicates a button already assigned to a DN, CA or to Intercom or Intercom Group, or to a local feature such as
∙Unlit indicates an unassigned button.
2.Press the button to which you want to assign the network feature.
Page
