SRS | Appendix C |
|
|
∙ Press 5 to start the Program | Key Test |
and Loop switch test (with |
|
optional data terminal adapter | Pressing any button other than 1 |
only). | through 5 sounds its associated |
These tests are described in the | confirmation or DTMF tone, turns |
sections below. Tests 1, 2, 3, and | its LED red (if it has one), and |
5 can be started and interrupted at | displays the following information |
will to change the test under way, | on the LCD: |
but test 4 cannot be interrupted |
|
by pressing any key. |
|
For the keys:
Soft keys
Key Menu Key
Multifunction buttons
Fixed function buttons
DTMF keypad keys
This information is displayed:
SOFTWARE Key X
Key Menu
MULTI ASSIGN KEY nn
FUNCTION KEY 1 FUNCTION KEY 2 FUNCTION KEY 3 FUNCTION KEY 4 FUNCTION KEY 5 FUNCTION KEY 6
TEN KEY X
With the range and meaning shown here:
X=1:SOFT1 2:SOFT2 3:SOFT3 4:SOFT4
Key Menu Key
nn: 1 to 18 (key no.)
DROP
TRANSFER
HOLD
CONFERENCE
REDIAL
SPEAKER
X=(5), 6, 7, 8, 9, 0, #, and *
(DTMF keys 1, 2, 3, 4, and 5 (with data terminal adapter installed) are reserved for test selection and not displayed on the LCD.)
Tone Test
When you press 1 on the DTMF keypad, the speaker sounds a Ringer Tone. If you pick up the handset, the ringing stops and a Busy tone is sent to the handset.
The LCD shows the following display:
Page
