Fujitsu manual SRS-1050 Components, Function Keys, Permanent Functions

Chapter 1	( SRS -1050 Overview
SRS-1050 Components	7) Volume/Contrast buttons.
1) Handset/Headset. Use the	Increase or decrease display
	contrast (when no Call
familiar handset, the speaker and
	Appearance is active), or speaker
microphone, or a headset to make
	volume (when a CA is active).
or answer calls.
2) 9) Speaker/Microphone. The	8) Function keys. Single-touch
	keys for ISDN features (see
speaker is located directly under
	Function Keys).
the handset. In handsfree
operation, it lets you hear the
other parties on a telephone call.	Function Keys
The microphone on the front edge
of the front edge of the phone	The SRS-1050 has six function
picks up your voice, unless	buttons. Three of these are
switched off with the MIC-OFF	permanently assigned to local
key.	functions: SPEAKER, HOLD, and
3) Numeric Keypad. You use	REDIAL.
these twelve keys to enter the	Permanent Functions
number you are calling or the	SPEAKER	Enables/disables
special characters *(asterisk) or
		handsfree operation
#(pound sign).
4) Display. The display shows	HOLD	Holds an active call
call information such as the	REDIAL	Redials the last number
telephone number of the other		you dialed
party, call duration, and time of	For ease of installation, Fujitsu
day.
	supports two sets of telephone
5) Softkeys/KEY MENU. Four	company assignments for
buttons below the display with	network based features. On the
changeable functions. The KEY	labeled function buttons for
MENU key displays the current	CONFERENCE, DROP, and
functions on line 2 of the display.	TRANSFER, Fujitsu sets accept
6) Multifunction buttons. These	the following values or feature
	activators:
buttons are assigned to Call
Appearances, one-touch	CONFERENCE		Button 18
numbers, or network features.		Activator 18 or 60
	DROP		Button 19
		Activator 19 or 62
	TRANSFER		Button 20
		Activator 20 or 61

Page 1-3