Fujitsu SRS-1050 manual Questions, Details, or, Alternatives, Transfer ï DMS-100ï

SRS -1050 Voice Features (	Chapter 2
1. Press TRANSFER while on an	Questions, Details, or
active call.	Alternatives
The LED of the Call Appearance	If no one answers the destination
in use flashes red; the called or	number, hang up. Press the
calling party is automatically	SPEAKER button, the Switch
placed on hold.	Hook, or, with a Lucent switch,
	press DROP. Then press the Call
An idle Call Appearance is	Appearance holding the original
selected. Its LED lights steady	call. This cancels the attempted
red and a dial tone sounds.	transfer and returns you to the
	call.
If that directory number has no
idle Call Appearance, you must	TRANSFER ï( DMS-100ï
select a Call Appearance of
another directory number.	Transfers a call to another
2. Dial the third party.	phone and announces the
	transfer privately
3. Once connected, announce the	Transfer is a network-based
transfer to the person who
	feature that you must subscribe
answers and converse privately.
	to from your telephone company.
4. Press TRANSFER again, and	This description assumes that
	you have assigned the Transfer
hang up.
	feature to one of your SRS-1050
The third party, just called, is	function buttons.
connected to the party held for	Note: In some installations,
transfer. You are dropped from
	transferring calls is
the call, and the other two
	accomplished without a
parties remain connected.
	TRANSFER button. If your
Note: A "blind" transfer is one	set lacks a TRANSFER
	button, ask your System
in which you do not talk to the
	Administrator how to transfer
person you are transferring
	a call.
the call to. To perform a blind
transfer, wait for the person's	To transfer a call, follow these
phone to ring, press the
	steps:
TRANSFER key, and hang up.
	1. While still on the call, press
	TRANSFER.

Page 2-16