Fujitsu SRS-1050 manual Setting CALENDAR/CLOCK, Information

SRS -1050 Local Features ( Chapter 3

ENTER DIRECTORY NUMBER

DN=8247629,99,,2502 (12)

If the number stored on the one- touch button is more than 16 digits, a right arrow (è) appears at the end of the line of numbers, indicating that additional numbers exist. To see the additional numbers, press NEXT (softkey 2). Pressing NEXT repeatedly alternates between the two displays.

ENTER DIRECTORY NUMBER

DN=94783664,1994,,7è(14)

ENTER DIRECTORY NUMBER

DN=è437709(14)

3.Complete the procedure in one of these ways:

∙To change the number, enter a new number. Then press ENTER (softkey 1).

The new number appears on the display as you enter it, and replaces the old number.

∙To cancel the number, press CLEAR (softkey 3) and then ENTER. The button is canceled as a one-touch button, and the green indicator goes dark.

∙To leave the number unchanged, press REGISTER (softkey 4) to return to the normal display.

SETTING THE

CALENDAR/CLOCK

The normal SRS-1050 display includes the date, time, and day of the week. You can set the date and time by using the procedure described below.

Notes on Entering

Information

If the value you have entered is acceptable, press ENTER to record it and display the next parameter screen.

To retain the currently displayed calendar/clock value for a parameter, you can press ENTER without bothering to reenter the value.

To change a numerical entry (not including menu selections) before you press ENTER, press CLEAR (softkey 3) and enter the desired value.

To change a menu selection or a numerical entry after you press ENTER, press asterisk (*). This returns you to the preceding data entry screen, where you can enter the correct information.

Page 3-6