Fujitsu SRS-1050 manual Selecting a Menu Option

SRS -1050 Local Features ( Chapter 3

If for any reason you become confused while working in menu mode, you can always press REG (softkey 4) to return to the menus and start over.

Selecting a Menu Option

You can display and choose among the thirteen menu options at any time, as follows:

1.Press REG (softkey 4) to display the menu options. The screen looks like this:

1:ONE-TOUCH	2:CALENDAR
3:INITIAL	(SELECT 1-13)

To see the next menu screen, press NEXT (softkey 2):

4:UNA5:H-FREE 6:HAND/HEAD (SELECT 1-13)

Press NEXT again to see the third menu:

7:RINGER	8:SPID/TEI
9:MSG-LOG	(SELECT 1-13)

Press NEXT again to see the fourth menu.

10:KEY-ATTR	11:I-COM
12:MIC -OFF	(SELECT 1-13)

Press NEXT again to see the fifth and final menu.

13: PREF

(SELECT 1-13)

Note: Older versions of this digital set may display fourteen menu items as follows:

13: SPEAKER -VOL	14:PREF
	(SELECT 1-14)

Press NEXT repeatedly to cycle through these five menus.

2.To select the option you want, press the appropriate key(s) on the numeric keypad to dial 1 to 13 (do not press one of the four buttons under the screen) and then press ENTER (softkey 1). If you notice a mistake after pressing ENTER and want to cancel the keypad entry, press asterisk (*). To clear an entry before pressing ENTER, press CLEAR (softkey 3).

3.To exit menu mode, press REG (softkey 4). If you forget to exit, menu mode is automatically canceled after four minutes, or whenever you pick up the handset or press SPEAKER.

Whenever REG is pressed, it either enters or exits menu mode, no matter what else may be in progress.

Page 3-2