Fujitsu SRS-1050 manual Standard Softkey Layout, Softkeys, Timeouts

(Fujitsu SRS -1050

Softkeys

The softkeys are the four keys located just below the display. When you press the KEY MENU button to their right, function labels appear on line 2 of the display.

UNA DATA CLEAR REG

1 2 3 4

Standard Softkey Layout

Key Menu

(The DATA softkey label appears only if you have the data model.)

Note: Softkey 1 also serves as the ENTER key (for entering information as indicated in this User Guide).

Softkeys are a way of simplifying the phone and still supporting the richness of ISDN features. These keys assume different functions depending on the feature you are using, thus avoiding the need for a large number of permanent function keys.

You can display the labels at any time without affecting the tasks you are performing. The labels do not, however, have to be displayed for these keys to work.

Timeouts

When you are setting up local features as described in Chapter 3, some of the data entry displays have built -in timers. If you do not enter information within six seconds, the display reverts to the menu for selecting the feature you were setting up. You must reselect the feature and start again.

Page 9